Contact Us |
Built in Brooklyn
Free shipping on every shelf
Visit Our Woodshop
Trade Classes
MenuIcon
0
0
Shop all Shelves Home Goods Clearance

Classic Floating Shelves

Floating wood shelves add classic appeal to the walls of your home or business. Appreciated for their sleek clean lines, these sturdy, hidden bracket shelves appear to magically float on walls creating a versatile look perfect for any kitchen, living room, dining room, laundry room, bedroom, and office.

Shop all our shelving styles

Classic Floating Shelves

47 products

Load more

Solid wood floating shelves, built one board at a time in Brooklyn. Real oak, light brown with a visible grain, and dark mahogany, on hidden steel brackets, in sizes from a small 6 inch thin shelf to an 84 inch thick board, with walnut stain and paint-grade poplar as the other finishes.

Thin shelves are 7/8 of an inch thick, 6 to 36 inches long and 3 to 8 deep. Thick shelves are an inch and a half, 12 to 84 inches long and 4 to 12 deep, holding roughly 45 to 50 pounds per wall stud. Past 84 inches, modular shelving joins boards end to end for a run at any length, and odd sizes in between are custom orders.

Looking for a specific shape? Start with corner shelves, thin shelves, or shelves with visible brackets.

A floating shelf is a solid board that mounts with no visible support. The back of the shelf is routed for a hidden steel bracket: the bracket screws into your wall studs, the shelf slides over it, and all you see is wood. Ours are solid oak and mahogany, built in Brooklyn, in thin (7/8 inch) and thick (1 1/2 inch) profiles from 6 to 84 inches long.

You can, and plenty of people do. You will need lumber, a router or drill press for the bracket channel, a saw, sandpaper, finish, and a hidden bracket kit, plus a level and a stud finder for the install. The two spots that decide the result are routing the bracket channel straight and mounting the bracket dead level. If the tooling is the obstacle, our shelves arrive routed, finished, and ready to mount in about ten minutes.

Three steps. Find your wall studs and mark them. Screw the steel bracket into the studs, checking it with a level before the final tightening. Slide the shelf over the bracket until it sits flush against the wall. Every shelf ships with its bracket, screws, and instructions, and most installs take about ten minutes with a drill, a level, and a stud finder.

The support is inside the shelf. A steel bracket mounts to the wall studs, and the board has channels drilled into its back that slide over the bracket's rods. Once the shelf is on, the bracket is completely enclosed in wood, which is why the shelf appears to float. Installed into studs, our thick shelves hold roughly 45 to 50 pounds per stud.

All of ours are solid wood floating shelves, never veneer over particleboard. Oak is light brown with a visible grain and a slight reddish cast; mahogany is deep red brown and darkens a shade with age; walnut stain on mahogany is the darkest option. Poplar is the choice if you plan to paint, and the thin shelves also come in maple. Wood samples are available if you want to check color against your wall.
Contact Us
(201) 374-0753
0